info@joint-belt.com
PRODUCT DISPLAY   -   Rubber Belt Strip Machine
Rubber Belt Strip Machine
NO. 1 INTRODUCTION
EP/RUBBER belt strip machine is used to strip adhesive layer of belt, belt strip machine is widely used in the following industries, such as cement plant, power plants, mining, belt company, steelworks and port, etc.

NO.2 FEATURES
1. Max. strip width till 200-300 mm, speedy, reduce labor intensity and save time;
2. Lightweight, carry easily, simple operation and stable.

NO.3 TECHNICAL PARAMETER
Voltage: 220V/380, 50/60HZ;
Motor power: 0.75 KW;
Linear speed: 0.3 m/s;
Max. Strip width: 200 mm;
Weight: 32 KG;
Suitable for EP, NN, rubber, canvas belt, belt width from 650 mm to 2400 mm.

NO.4 USER MANUAL
1. Fix center line of conveyor belt, and spit the first layer of joint end.
2. Put Belt Strip Machine on appropriate location and fix well by steel cord;
3. Connect power;
4. Clamp the first layer, start motor and spit the stripped part of belt by knives.
5. After strip the first layer, then repeat the above steps to strip the second and third layers.

NO.5 ATTENTIONS
1. Power should be connected and operated by the professional electrician.
2. Belt strip machine should be fixed well as working and prevent sliding.
3. Don't exceed the relevant strip width as required.
4. Don't press button of "push" and "pull" simultaneously, otherwise, motor will be burned up.

NO.6 PLEASE SPECIFY WHEN ORDERING
Please advise voltage, format:_____V______HZ_____PHASES.

←[Previous:]

Related products:

HOME|ABOUT US|PRODUCTS| CASE STUDIES|FAQS|CONTACT
Copy right © 2014 DL Industrial Limited All Rights Reserved    Address: No. 268 Xizhang Rd., Gushan Town, Jiangyin City, Jiangsu, China